Kollmorgen’s Powerpac® K and N Series Stepper Motors deliver more power in a smaller package. The NEMA 34 and 42 (90mm and 110 mm) motors combine optimal magnetics in a housingless frame with a large diameter rotor and innovative rotor-stator design to produce more torque and smoother microstepping. With holding torques to 5700 oz-in (356 lb-in), the N and K Series provide high torque per frame size, with more than three and five phase designs. Features: Wide range of standard options Affordable co-engineered modifications with a short lead time to meet unique application requirements N3 models, NEMA 34 (90 mm) motors are available in 4 stack lengths with torque ratings from 3.2 to 15.4 N-m (454 to 2,180 oz-in) nominal holding torque. K3 models, NEMA 34 (90 mm) motors are available in 4 stack lengths with torque ratings from 4.08 to 19.7 N-m (578 to 2,790 oz-in) nominal holding torque. N4 models, NEMA 42 (110 mm) motors are available in 3 stack lengths with torque ratings from 8.12 to 30.8 N-m (1,150 to 4,365 oz-in) nominal holding torque. K4 models, NEMA 42 (110 mm) motors are available in 3 stack lengths with torque ratings from 10.4 to 40.3 N-m (1,470 to 5,700 oz-in) nominal holding torque. Extensive selection of shaft configurations, terminations, windings and co-engineered modifications to suit your application needs, time frame and budget Speeds up to 3,000 rpm meet the velocity demands of most high-torque applications Improved torque linearity (above rated current) provides high peak torque to boost acceleration in intermittent-duty applications High torque at moderate speeds to enable a cost-effective alternative to servo motors Low detent torque harmonic provides smoother microstepping performance K Series incorporates SIGMAX® technology for 25% more torque than N Series Runs cooler than comparable steppers to provide longer, more reliable motor life Special rotor design enables high acceleration Rugged, “housingless” square frame means more torque in a smaller package IP65 sealing for splashproof protection Two-phase design is compatible with most drives and provides smoother microstepping and lower power input versus three-phase motors Optional encoder mounting provisions Powerpac® Series Stepper Motors NEMA 34 Selection Guide Powerpac® Series Stepper Motors NEMA 42 Selection Guide Powerpac® K and N Series Stepper Motors Installation Guide