The compact and PCB-mounted Gold Bell from Elmo is a high-performance, ultra-small, network-based (EtherCAT, CANopen) Stepper Motor Servo Drive that delivers up to 20A/100V and up to 10A/200V. This advanced, high power density stepper motor driver provides top performance, advanced networking and built in safety, as well as a fully featured motion controller and local intelligence. The Gold Bell has been designed to operate in a closed loop (single or dual feedbacks), or in open loop. Weighing just 55 g (1.94 oz), the Gold Bell offers up to 1.6 kW of continuous power or 3.2 kW of peak power. This advanced, high power density stepper motor driver provides top performance, advanced networking and built in safety, as well as a fully featured motion controller and local intelligence. The Gold Bell is powered by a single 12 V – 95 V isolated DC power source (not included) and a ‘smart’ control-supply algorithm enables the drive to operate with only one power supply with no need for an auxiliary power supply for the logic. In conjunction with the Gold Maestro, the ultimate distributed network motion controller, and the other members of the Gold Line of intelligent servo drives, state-of-the-art solutions for the most challenging multi-axis motion applications can be easily implemented, with a short development cycle while maintaining high performance. Within the Gold Bell Stepper Drive series, the following options are available: Gold Solo Bell Gold DC Bell Gold DC Bell Datasheet Gold Board Level Hardware Manual Gold Bell Datasheet Gold Bell Installation Guide Gold Bell Stepper Drive Datasheet