Heason Technology

PMAC2A PC104 Motion Controller from Delta TauPMAC2A PC104 Motion Controller from Delta Tau

The PMAC2A PC/104 provides up to 8 axes of control in the smallest form factor that Delta Tau offers, capable of Filtered PWM output, using the PMAC2 CPU.


Features

  • 40 MHz DSP563xx CPU (OPT-5AF 80 MHz 560xx equivalent)
  • 128K x 24 internal zero-wait-state SRAM
  • 512K x 8 flash memory for user backup and firmware
  • Latest released firmware version
  • RS-232 serial interface
  • 4 channels axis interface circuitry, each including:
  • 12-bit +/-10V analog output
  • Pulse-&-direction digital output
  • Quadrature encoder inputs A, B, C, channels with differential/single-ended drivers
  • 4 input flags, 2 output flags at TTL levels
  • 3 PWM top-and-bottom pairs (unbuffered)
  • 50-pin IDC header for amplifier/encoder interface
  • 34-pin IDC header for flag interface
  • PID/notch/feedforward servo algorithms
  • 1-year warranty from date of shipment

 

Servo Features

  • Standard digital PID feedback filter
  • Velocity, acceleration, and friction feedforward
  • 2nd-order notch/low-pass filter
  • Gains changeable at any time
  • Programmable input, integrator, and output limits
  • Optional 35-term pole-placement servo filter

 

Commutation Features

  • Sinusoidal commutation of AC servo motors
  • Vector control of AC induction motors
  • Digital current-loop closure with direct PWM output (PMAC2)

 

Compensation Features

  • Position compensation tables (1D and 2D)
  • Torque compensation tables
  • Backlash compensation
  • Tool radius compensation

 

Software Features

  • Trajectory Generation Features
  • Linear interpolation mode with S-curve accel/decel
  • Circular interpolation mode with S- curve accel/decel
  • Rapid point-to-point move mode
  • Cubic B-spline interpolation mode
  • Cubic Hermite-spline (PVT) interpolation mode
  • Automatic move-until-trigger functions with hardware capture
  • Interactive jog moves
  • Optional multi- move lookahead for velocity and acceleration limiting
  • Safety Features
  • Hardware and software overtravel limits
  • Amplifier enable/fault handshaking
  • Following error limits
  • Integrated current limit
  • Encoder loss detection (some versions)
  • Watchdog timer
  • Program and communications checksums

 

Computational Features

  • Real-time multi-tasking operating system
  • 48-bit floating-point math for user programs
  • Trigonometric and transcendental functions
  • Automatic type-matching of different variable types
  • Feedback sensor types that can be processed
  • Digital quadrature encoders
  • Sinusoidal encoders, interferometers
  • Resolvers
  • Potentiometers
  • LVDTs, RVDTs
  • Parallel-format encoders, interferometers
  • MLDTs
  • Serial absolute encoders (e.g. SSI)

 

Coordination and Master/Slave Features

  • User-defined coordinate systems for automatic coordination of axes
  • Separate coordinate systems for independent motion of axes
  • Multi- motor axis support (e.g. gantries)
  • Dynamic axis transformations (e.g. offsets, rotations, mirroring)
  • Electronic gearing (no programming required)
  • Electronic cams with programmable profiles

 

Motion Program Features

  • High- level programming language
  • Automatic sequenced execution of moves
  • Calculations and I/O synchronous to motion
  • Axes programmed in user engineering units
  • Motion values as constants or expressions
  • Automatic coordination of multiple axes
  • Ability to execute G-code programs

 

PLC Program Features

  • Execution asynchronous to programmed motion
  • I/O control as in hardware PLC
  • Executive functions for standalone applications
  • Safety and status monitoring
  • Servo gain scheduling
  • Data reporting functions
  • Access to all registers in controller

Specifications

Downloads

PDF Manual - > PMAC2 User Manual

PDF Manual -> EZ PMAC2A PC104 Quick Setup Manual

Videos

Manufacturing Partner

PMAC2A PC104 Motion Controller from Delta Tau

Manufacturer: Delta Tau | Category: Business & Industrial | Author: Heason Technology | Product Code: PMAC2A PC104


Share this on social Media
See what is happening at Heason today
Heason Technology Limited
Motion Solutions Centre
Spring Copse Business Park
Slinfold
West Sussex
RH13 0SZ UK

Tel: +44 (0) 1403 792 300
Email: sales@heason.com

Heason Technology
A discoverIE plc company

Subscribe to our Mailing List
Keep up to date with all our latest product news & information.
Subscribe here
Facebook Twitter Google+ LinkedIn

© Copyright Heason Technology Ltd 2018