Technical Blog

Advances in technology and design pushes trend towards Electro-Mechanical Actuators

There are several factors which are driving this conversion, but the most significant is the increasing requirement to achieve the following objectives: Improved machine performance and functionality: due to electro-mechanical actuators being capable of higher precision. Smaller...

Kollmorgen PMX Series Stepper Motors

What does a PMX Series Stepper Motor do? With six NEMA frame sizes including 08, 11, 14, 17, 23 and 34 each stepper motor in the PMX series provides several stack-length options and deliver holding torque from 2.8 Ncm to 11.4 Nm. The newest of the frame sizes, 08, 11 and 14, allow high...

How the Thomson Max Jac® Linear Actuator excels under the harshest conditions

The Max Jac linear actuator has undergone rigorous testing throughout its entire development process ensuring that it will deliver trouble-free operations, long life and outstanding performance. Features include: Long life Reliability High speed High efficiency Minimal...

Slip Rings from Heason Technology

Other key features include: IP65 protection Water Resistant to IP67 standard Suitable for extreme environments Compliant to CO and/or ROHS Mountable of the shaft Flat design Take a look below at the reasons why you should choose Heason Technology as your Slip Ring...

EtherCAT compliant servo drives

What is EtherCAT? EtherCAT is an Ethernet-based fieldbus system which is suitable for Control Automation Technology. It was introduced in 2003 to develop the adaption of Ethernet to automation applications which required short data update times and cycle times. It is a protocol that is...

Single cable feedback for S300 and S700 servo drive series

The memory of the drives has also been increased ensure continued development of these series of servo drives. In the future, each of the drives with increased memory will: Have new hardware versions S300: 4.20 / S700: 2.30 Have a new monitor program Have the ability to be programmed with...