Heason Technology
Avoid cable damage to your moving head projector

Avoid cable damage to your moving head projector

​In the present-day moving head projectors are being used much more frequently in theatres and Shows. Also known as intelligent lighting, or moving lights, they can be controlled in many ways - the most recent development being Remote Device Management.

These types of projectors must be resistant and extremely flexible in order to solve a variety of problems faced by lighting engineers. For this reason, these projectors are equipped with a wide range of motors to manoeuvre them when the requirement for quiet, smooth and high speed movements (such as tilt, pan and focus) are a necessity.

To control the motors and sensors it is necessary to run the cables through the pan movement, however, as a consequence the cables can become twisted and the functionality can be affected. To avoid either cable damage to the moving head projector it is necessary to use a Slip Ring on the pan axis.

In cases where it may be necessary to have more than one turn in both directions for making the moving head projector more flexible, Slip Rings become mandatory.

The most suitable Slip Ring for this type of projector is the our SVTS A 03/04 Series.

What is an SVTS A Series Slip Ring?

This particular series of Slip Rings can be used for any system requiring transmission of an electrical or power signal to an intermittent, or continuous, rotating shaft. With a small ring diameter this enables a low peripheral speed between brushes and rings, as well as reduced dynamic imbalance that means very low wear and low life.

Designed to deliver a flexible, cost effective, reliable and high quality solution these Slip Rings are available in a variety of configurations and with 3 to 56 circuits. Their compact size also allows installation into small systems requiring high performance.

The SVTAS A Series use gold to gold alloy assuring long life time, reduced electric noise, interferences between circuits and low contact electric resistance. Features include: 

CLICK HERE to find out more about this particular series of Slip Rings.

Alternatively, if you have a questions or an application you need support with call us on +44 (0) 

1403 792 300 or email sales@heason.com

Date: 16 / 05 / 2017

Share this on Social Media

See what is happening at Heason today
Heason Technology Limited
Motion Solutions Centre
Spring Copse Business Park
West Sussex

Tel: +44 (0) 1403 792 300
Email: sales@heason.com

Heason Technology
A discoverIE plc company

Subscribe to our Mailing List
Keep up to date with all our latest product news & information.
Subscribe here
Facebook Twitter Google+ LinkedIn

© Copyright Heason Technology Ltd 2018