Frameless Motors from Heason Technology
Frameless, ironcore and ironless linear motors with frameless torque motors.
Increase productivity and reduce operating costs – with the ICH linear motors from Kollmorgen you considerably improve overall equipment effectiveness. Eliminate the costs for maintenance work out of your calculations! Linear direct drives from Kollmorgen increase throughput by up to 40% compared with other drive systems and enable smaller, lighter machines with high energy efficiency due to their compact design.
The deeper your exploration takes you, the higher your production temperatures and pressures, the more you depend on motors that can handle the extremes.
HT (High Torque) series of frameless brushless torque motors are available in nine standard diameters from 19.3 mm (0.760 in) to 127 mm (5 in) with up to six stack lengths each. Continuous torque ratings range from 0.021 Nm (2.9 oz-in) to 4.4 Nm (693 oz-in). Winding voltage is 24 VDC or 100 VDC, depending upon model. Hall effect commutation sensors are integral to the motor, and require no setup on the part of the user.
Frameless Megaflux series of high performance frameless brushless torque motors are computer- designed and ‑optimized to provide the highest torque density brushless torque motors available. Special attention has been given to the minimization of their cogging torque to enhance their performance in precision applications.
The KBM™ Series is designed to be directly embedded in your machine, using the machine’s own bearings to support the rotor. With a huge selection of standard motors—plusthe ability to quickly and cost-effectively incorporate co-engineered modifications—you can choose an exact-fit motor that provides the highest performance in the most compact space.
Our exclusive Cartridge DDR servomotors combine the performance advantages of a frameless motor with the ease of installation of a full-frame motor. They feature an integrated, factory-aligned high resolution feedback device and a unique bearingless design that couples directly to the load, using the machine’s own bearings to support the rotor. Most models can be installed in under five minutes.
RBE Series includes a wide range of brushless motors for direct drive applications. These motors are produced in housed (RBEH) and frameless (RBE) configurations. They are currently available to support existing customers only. For new applications we recommend KBM™ Series frameless DDR motors, D and DH Series housed motors or the innovative Kollmorgen Cartridge DDR Series.
IC Series Ironcore motors provide the highest force per frame size and feature a patented anti-cogging design for smooth operation. These motors have coils wound on silicon steel laminations to maximize the generated force with a single-sided magnet way. Our co-engineering capabilities allow us to meet your stroke and payload requirements without the time and expense of a customized solution
ICD Series Ironcore motors feature a low-profile design and low attractive force, and are a suitable replacement for many ironless applications. They provide the highest force per frame size and feature a patented anti-cogging design for smooth operation. Our co-engineering capabilities allow us to meet your application’s stroke and payload requirements without the time and expense of a customized solution.
Kollmorgen IL Series Direct Drive Linear ironless motors have no slots for the coil windings. This design provides a very light mass, zero attractive forces between the coil assembly and the magnet way, and zero cogging. These motors are ideal for applications requiring very low bearing friction, high acceleration of lighter loads, and constant velocity even at ultra-slow speeds.