NextMove ES

Product Description:

NextMove ES is a compact EuroCard format motion controller for the control of up to 6 axes of control (2 servo, 4 open loop stepper). Using the latest generation 32-bit Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA), NextMove ES, coupled with MintMT, offers a high speed and flexible motion controller.

On board I/O can be used to control many parts of the machine. This can be further expanded with either Baldor's range of CAN I/O modules operating over the NextMove ES CAN bus, or alternatively, CANopen devices conforming to the standard DS401 I/O profile.

Versatile programming is provided by means of Mint - multitasking BASIC, embedded 'C' or the supplied ActiveX components.

NextMove ES is available with RS232 (or optional RS485) and USB programming ports.

Product Features:

• Eurocard 3U rack mount configuration. Optional backplanes available with screw terminations
• 32-bit 120MHz Digital Signal Processor (DSP)
• 2MByte SRAM for user programs and data
• 2MByte FLASH for firmware and user program storage
• 32kByte FRAM for non-volatile parameter storage
• Controls 2 axes of servo & 4 axes of stepper, or:
• 6 axes of servo - when used with FlexDrive or MicroFlex in step and direction mode
• 17 uncommitted non-isolated digital inputs
• Programmable for hardware limits, home input, stop input and error input. 4 of the inputs can be programmed for high speed capture of position with 1 microsecond.
• 11 uncommitted digital outputs. 5V open collector Darlington
• Programmable for drive enable and high speed position compare output
• 24V/150mA relay output to signal system error conditions
• 2 x 12-bit uncommitted analog inputs
• RS232 (115,200 Baud) and USB programming interfaces
• USB drivers compatible with Windows 2000/XP
• Optional RS485 serial port
• CAN interface for I/O expansion and HMI interfaces. Can be used to provide full peer-to-peer networking capabilities with other Mint based controllers
• Multi-tasking programming capability with MintMT. Number of tasks limited only by available memory
• Comprehensive move types including: linear, circular and helical interpolation; software cams; flying shears; splines; synchronization with positional offsets and virtual axes
• Embedded 'C' programming capability (Note: requires purchase of appropriate Texas Instruments compiler)
• ActiveX libraries supplied free of charge
• Compatible with MintNC and HPGL