Geo Direct PWM Drive

Home

Catalogue

Drives

Geo Amplifier

Geo Direct PWM Drive

Address:

Motion Solutions Centre
Spring Copse Business Park
Slinfold
West Sussex
RH13 0SZ
UNITED KINGDOM

Telephone +44 (0)1403 755800
Fax +44 (0)1403 755810

sales@heason.com

Register with Heason

Latest News

Dover Motion DDM Series

Dover Motion DDM series open frame X-Y table suits high throughput image and bio processing...

Kollmorgen's Best European Distributor 2011

Kollmorgen's Best European Distributor 2011 - Heason Technology and SDT Scandinavian Drive Technologies...

Heason's H Series Actuator

New low cost linear actuator range is adaptable and flexible...

Product Description:

The Geo Direct PWM drive accepts direct PWM signals from the controller, providing serial digital phase current feedback. This interface comes through a standard 36-pin Mini-D style connector, compatible with virtually all other power-block drives. In this form, the drive performs no control functions. It simply provides the raw power stage.
No position feedback or I/O is connected to the drive (other than a power block thermal sensor and a possible motor thermal sensor). There is no connection to the controller other than the 36-pin cable, which brings in the PWM commands from the controller, and returns serial digital current values, as well as temperature data.

Product Features:

RMS AMPS Cont/Peak	Cont Pwr KW (HP) at 230VAC	Cont Pwr KW (HP) at 480VAC	# of Axes	Width
1.5/4.5*	0.37 (0.5)	0.75 (1.0)	2	84mm (3.3")
3/9*	0.75 (1.0)	1.5 (2.0)	2	84mm (3.3")
05/10	1.3 (1.7)	2.5 (3.3)	1 or 2	84mm (3.3")
10/20	2.5 (3.3)	5.0 (6.7)	1 or 2	240/480 1-Axis (3.3") 84mm 240V 2-Axis (3.3") 84mm 480V 2-axis (6.6") 168mm
15/30	3.7 (5.0)	7.5 (10.0)	1 or 2	240/480V 1-Axis (3.3") 84mm 240/480V 2-Axis (6.6") 168mm
20/40	5.0 (6.7)	10.0 (13.3)	1	168mm (6.6")
30/60	7.5 (10.0)	15.0 (20.0)	1	168mm (6.6")

Continuous power is calculated using 60% of AC input voltages shown. All ratings are specified @45 degrees C, Sinusoidal RMS
* Rated 1 or 3 Ø
Dimension: Height: 250mm (9.9")
Depth: 206mm (8.1")
Width: 84mm (3.3") or 168mm (6.6")

Amplifier Features:

Direct Line Connections models for either 240VAC or 480VAC, 1-or 3-phase
Ratings from 1.5A continuous to 60A peak
DC bus operation from 24VDC to 740VDC
Designed for UL and CE Certification
One or two axis configurations
Integrated bus power supply including shunt regulator and soft start
Seven amplifier status display